- About Us
- Products
- Partnerships
- Events
CELVOLIT 1488
| Specification and Property | Method | Unit | Typical value |
|---|---|---|---|
| Solid content (130 °C, 30min) | ISO 3251 | % | 54.5 ~ 56.5 |
| Brookfield viscosity (BVF RVT 4#/20, 25 °C) | ISO 2555 | mPa.s | 4000 - 6000 |
| pH value | ISO 976 | 4.0 ~ 5.0 |
|
| Minimum film forming temperature (MFFT) | ISO 2115 | °C | Approx. 0 |
| Tg ( Heat rate 10°C/min, onset point) | ISO 16805 | °C | Approx. 2 |
| Glass transition temperature (Heat rate 10˚C/min, middle point) | ISO 16805 | °C | Approx. 6 |
| Appearance of polymer film | Slightly opaque, soft film. |
||
| * Standard adjusted to Celanese method. Further details regarding the test method can be made available on request. |
|||
| ** These quality data are determined by these product specification for each lot before release by our quality control laboratory. | |||
| *** These data are solely to describe the product. They are not subject to constant monitoring or part of the specification | |||
- Description
- Additional information
- Reviews (0)
Description
WHAT IS IT
It is an un plasticized copolymer emulsion of Vinyl acetate and ethylene.
WHY USE IT
- High wet tack
- Fast setting
- It provides adhesion to a wide variety of substrates with a strong and permanently bonding strength with high heat resistance.
- When Celvolit®1488 (SG) is dried at temperatures above 0˚C, the dispersion forms a slightly opaque, soft film without the addition of solvents or plasticizers.
- Is compatible with a variety of plasticizers, solvents, fillers and other modifiers.
Copolymer Emulsion of Vinyl Acetate and Ethylene Characteristic Data*
Additional information
| Industry | Construction |
|---|
Be the first to review “CELVOLIT 1488”
Related Products
-
Adhesives, Aliphatic Resin Obtained from Petroleum-Derived Monomers, Aliphatic Resin Obtained from Petroleum-Derived Monomers, Industrial Paints
Luhua
C9 BT-120
Aliphatic Resin Obtained from Petroleum-Derived Monomers
Industry : -
Converting Adhesives, Copolymer Emulsion of Vinyl Acetate and Ethylene, Copolymer Emulsion of Vinyl Acetate and Ethylene, Paper
Celanese
CELVOLIT 1499
Copolymer Emulsion of Vinyl Acetate and Ethylene
Industry : -
Adhesives, Construction, Packaging, Paper, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Textile
Kuraray
POLYSIZER -173
Polyvinyl Alcohol
Industry : -
Adhesives, Construction, Packaging, Paper, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Textile
Kuraray
POVAL 49-88
Polyvinyl Alcohol
Industry : -
Adhesives, Construction, Packaging, Paper, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Polyvinyl Alcohol, Textile
Kuraray
POVAL 5-88
Polyvinyl Alcohol
Industry :
CELVOLIT 1488
CELVOLIT 1488
Copolymer Emulsion of Vinyl Acetate and Ethylene
WHAT IS IT
It is an un plasticized copolymer emulsion of Vinyl acetate and ethylene.
WHY USE IT
- High wet tack
- Fast setting
- It provides adhesion to a wide variety of substrates with a strong and permanently bonding strength with high heat resistance.
- When Celvolit®1488 (SG) is dried at temperatures above 0˚C, the dispersion forms a slightly opaque, soft film without the addition of solvents or plasticizers.
- Is compatible with a variety of plasticizers, solvents, fillers and other modifiers.
Copolymer Emulsion of Vinyl Acetate and Ethylene Characteristic Data*
[get_product_name_table]
| Specification and Property | Method | Unit | Typical value |
|---|---|---|---|
| Solid content (130 °C, 30min) | ISO 3251 | % | 54.5 ~ 56.5 |
| Brookfield viscosity (BVF RVT 4#/20, 25 °C) | ISO 2555 | mPa.s | 4000 - 6000 |
| pH value | ISO 976 | 4.0 ~ 5.0 |
|
| Minimum film forming temperature (MFFT) | ISO 2115 | °C | Approx. 0 |
| Tg ( Heat rate 10°C/min, onset point) | ISO 16805 | °C | Approx. 2 |
| Glass transition temperature (Heat rate 10˚C/min, middle point) | ISO 16805 | °C | Approx. 6 |
| Appearance of polymer film | Slightly opaque, soft film. |
||
| * Standard adjusted to Celanese method. Further details regarding the test method can be made available on request. |
|||
| ** These quality data are determined by these product specification for each lot before release by our quality control laboratory. | |||
| *** These data are solely to describe the product. They are not subject to constant monitoring or part of the specification | |||
Reviews
There are no reviews yet.